TazerDT (19+ 1500 or TRX) TazerDT (19+ 1500 or TRX) ZAutomotive Please note, this item drop ships from ZAutomotive - standard (express) shipping in the lower 48 is $8.95 (this item is not part of our free shipping products on our site).  If you are not in the US, please email us before ordering.  TY! Tazer DT is to be an essential tool for owners of the new 2019 + Ram 1500 (New Body Style Only).  Now supports the TRX as well! Simple, plug-in installation – simply unplug the SGW module and plug the Tazer DT Mini in its place. It is located above the OBD2 Diagnostic connector. There are two sets of features – those that program the vehicle to accommodate modifications made to the Ram, and “live” features. These are all accessed using the dash display, using steering wheel buttons to navigate the menus. Settings – once the Tazer is “married” to the Ram, the following menus can be accessed. Unmarrying the Tazer DT will bring the settings back to stock. Perf menu:Adjust for alternate tire sizes up to 41″Adjust for alternate axle gear ratiosAdjust for an alternate transfer case LO range ratio TPMS menu:Disable the TPMS system if desiredChange font/rear TPMS warning PSI limit Radio menu: Disable Backup camera Enable Cargo/front/undercarriage Camera input Enable CD audio input Disable Travellink (weather warnings included) Lighting Menu Change DRL location Disable DRL Dropout Enable Fog lamp output Disable Fog lamp dropout Disable one-touch lane change Disable Halo’s Set LED 3rd brake light type. Set LED Fog light type Set LED tail lamp type Set LED front turn signal type. Set Trailer Tow output for use with Mopar kit Other menus Disable/Enable Front and Rear Lockers (for axle swap on Powerwagon) Enable Aux switch settings on the radio Enable Blind spot detection (sensors required) Change cluster splash screen to various Ram models Enable/Disable PANIC button on remote Live features Light shows: Can be accessed from the key fob or the on-screen menu. Six pre-set light shows, and three make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use. Automatic Power folding mirrors – mirrors fold and extend when the ignition is turned on/off Control front windows up/down from keyfob Disable Navigation in-motion lockout – enter addresses while the vehicle is moving Disable camera lockout – use the backup camera and/or added cargo/front/undercarriage camera at any speed for any length of time Auto Traction Kill – remembers the last state of traction control and will set it on start-up Auto stop-start Disable – remembers the previous state of ESS system and will set it on start-up Auto Tow Mode – remembers the last state of Tow mode and will set it on start-up TurnCAM – can turn on backup camera whenever turn signals are used 0-30 and 0-60 timers Cooldown mode – run engine fans when Ram is off, to aid in cooldown Winch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle Line Lock: Can lock front brakes for an easy burnout Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road. Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer DT’s functions, when cruise control is off Clear Check engine light Free USB updates – certainly more to come! DIRECTIONS can be found here!!

TazerDT (19+ 1500 or TRX)

Code: TazerDT
$329.00
In Stock
  • QUICK DELIVERY OPTIONS

  • FAST ORDER PROCESSING

  • SATISFACTION GUARANTEED

Please note, this item drop ships from ZAutomotive - standard (express) shipping in the lower 48 is $8.95 (this item is not part of our free shipping products on our site).  If you are not in the US, please email us before ordering.  TY!

Tazer DT is to be an essential tool for owners of the new 2019 + Ram 1500 (New Body Style Only).  Now supports the TRX as well!

Simple, plug-in installation – simply unplug the SGW module and plug the Tazer DT Mini in its place. It is located above the OBD2 Diagnostic connector.

There are two sets of features – those that program the vehicle to accommodate modifications made to the Ram, and “live” features.

These are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Settings – once the Tazer is “married” to the Ram, the following menus can be accessed. Unmarrying the Tazer DT will bring the settings back to stock.

Perf menu:
Adjust for alternate tire sizes up to 41″
Adjust for alternate axle gear ratios
Adjust for an alternate transfer case LO range ratio

TPMS menu:
Disable the TPMS system if desired
Change font/rear TPMS warning PSI limit

Radio menu:

  • Disable Backup camera
  • Enable Cargo/front/undercarriage Camera input
  • Enable CD audio input
  • Disable Travellink (weather warnings included)

Lighting Menu

  • Change DRL location
  • Disable DRL Dropout
  • Enable Fog lamp output
  • Disable Fog lamp dropout
  • Disable one-touch lane change
  • Disable Halo’s
  • Set LED 3rd brake light type.
  • Set LED Fog light type
  • Set LED tail lamp type
  • Set LED front turn signal type.
  • Set Trailer Tow output for use with Mopar kit

Other menus

  • Disable/Enable Front and Rear Lockers (for axle swap on Powerwagon)
  • Enable Aux switch settings on the radio
  • Enable Blind spot detection (sensors required)
  • Change cluster splash screen to various Ram models
  • Enable/Disable PANIC button on remote

Live features

  • Light shows: Can be accessed from the key fob or the on-screen menu. Six pre-set light shows, and three make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use.
  • Automatic Power folding mirrors – mirrors fold and extend when the ignition is turned on/off
  • Control front windows up/down from keyfob
  • Disable Navigation in-motion lockout – enter addresses while the vehicle is moving
  • Disable camera lockout – use the backup camera and/or added cargo/front/undercarriage camera at any speed for any length of time
  • Auto Traction Kill – remembers the last state of traction control and will set it on start-up
  • Auto stop-start Disable – remembers the previous state of ESS system and will set it on start-up
  • Auto Tow Mode – remembers the last state of Tow mode and will set it on start-up
  • TurnCAM – can turn on backup camera whenever turn signals are used
  • 0-30 and 0-60 timers
  • Cooldown mode – run engine fans when Ram is off, to aid in cooldown
  • Winch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle
  • Line Lock: Can lock front brakes for an easy burnout
  • Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.
  • Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer DT’s functions, when cruise control is off
  • Clear Check engine light

Free USB updates – certainly more to come!

DIRECTIONS can be found here!!

Please note, this item drop ships from ZAutomotive - standard (express) shipping in the lower 48 is $8.95 (this item is not part of our free shipping products on our site).  If you are not in the US, please email us before ordering.  TY!

Tazer DT is to be an essential tool for owners of the new 2019 + Ram 1500 (New Body Style Only).  Now supports the TRX as well!

Simple, plug-in installation – simply unplug the SGW module and plug the Tazer DT Mini in its place. It is located above the OBD2 Diagnostic connector.

There are two sets of features – those that program the vehicle to accommodate modifications made to the Ram, and “live” features.

These are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Settings – once the Tazer is “married” to the Ram, the following menus can be accessed. Unmarrying the Tazer DT will bring the settings back to stock.

Perf menu:
Adjust for alternate tire sizes up to 41″
Adjust for alternate axle gear ratios
Adjust for an alternate transfer case LO range ratio

TPMS menu:
Disable the TPMS system if desired
Change font/rear TPMS warning PSI limit

Radio menu:

  • Disable Backup camera
  • Enable Cargo/front/undercarriage Camera input
  • Enable CD audio input
  • Disable Travellink (weather warnings included)

Lighting Menu

  • Change DRL location
  • Disable DRL Dropout
  • Enable Fog lamp output
  • Disable Fog lamp dropout
  • Disable one-touch lane change
  • Disable Halo’s
  • Set LED 3rd brake light type.
  • Set LED Fog light type
  • Set LED tail lamp type
  • Set LED front turn signal type.
  • Set Trailer Tow output for use with Mopar kit

Other menus

  • Disable/Enable Front and Rear Lockers (for axle swap on Powerwagon)
  • Enable Aux switch settings on the radio
  • Enable Blind spot detection (sensors required)
  • Change cluster splash screen to various Ram models
  • Enable/Disable PANIC button on remote

Live features

  • Light shows: Can be accessed from the key fob or the on-screen menu. Six pre-set light shows, and three make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use.
  • Automatic Power folding mirrors – mirrors fold and extend when the ignition is turned on/off
  • Control front windows up/down from keyfob
  • Disable Navigation in-motion lockout – enter addresses while the vehicle is moving
  • Disable camera lockout – use the backup camera and/or added cargo/front/undercarriage camera at any speed for any length of time
  • Auto Traction Kill – remembers the last state of traction control and will set it on start-up
  • Auto stop-start Disable – remembers the previous state of ESS system and will set it on start-up
  • Auto Tow Mode – remembers the last state of Tow mode and will set it on start-up
  • TurnCAM – can turn on backup camera whenever turn signals are used
  • 0-30 and 0-60 timers
  • Cooldown mode – run engine fans when Ram is off, to aid in cooldown
  • Winch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle
  • Line Lock: Can lock front brakes for an easy burnout
  • Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle still, especially helpful when off-road.
  • Button Mapping: Use cruise up, down and right buttons as quick-access to some of Tazer DT’s functions, when cruise control is off
  • Clear Check engine light

Free USB updates – certainly more to come!

DIRECTIONS can be found here!!

Shipping Overview

What is your shipping cutoff time? 

Cutoff time for in stock items is 2PM CST for items shipping with FedEx.  USPS cutoff time is 10AM CST.   If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

 

Is shipping free? 

Orders over $99 qualify for free shipping within the lower 48 United States. We will select the most economical shipping option for our free shipping option.  If you'd like expedited service, please select that option during checkout.  Unfortunately, shipping to AK/HI or International we cannot offer free shipping, due to the extra costs incurred.  

 

How long will it take to get my stuff? 

Most in stock orders will ship the same day, if ordered before our cutoff times.  Custom items will ship when they are completed, please inquire for timelines on custom items (as this will vary).  We are located centrally in the US (St Louis MO) - so most items arrive within 2-4 days to the lower 48 US.  You will receive a tracking number when your item ships, allowing you to keep track of it at all times.  

 

I am an international customer, are fees / duties included in the shipping costs?

No, these fees will need to be paid by our international customers.  

 

How can I get a quote for shipping?

Please add the item in your cart and proceed through the checkout process. The system will display all the options we offer, along with a price. 

 

Refund / Exchanges

We have a 30-day return policy on non custom items, which means you have 30 days after receiving your item to request a return. 

To be eligible for a return, your item must be in the same condition that you received it, uninstalled and in its original packaging. You’ll also need the receipt or proof of purchase. 

To start a return, you can contact us at sales@retroshop.us. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. 

You can always contact us for any return question at sales@retroshop.us.

Damages and issues 
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Restocking Fees 
On non customized (returnable items), a restocking fee of 5-15% may be held from your refund.  Some items are special ordered in for customers, and if we have to return them to our suppliers, we may have a restocking fee for doing so.  If there are any questions on the restocking amount, please email us at sales@retroshop.us.

Exceptions / non-returnable items 
Certain types of items cannot be returned, like custom products (such as special orders or personalized items).  Please get in touch if you have questions or concerns about your specific item. 

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges 
Please contact us for any exchanges at sales@retroshop.us.

Shipping Charges
Shipping charges are not refunded.  If you selected our free shipping option, the amount we paid to ship the item to you will be deducted from your return.

Refunds 
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.