Morimoto XB LED Fogs: Type TOYOTA (ROUND) (Set / Black) Morimoto XB LED Fogs: Type TOYOTA (ROUND) (Set / Black) Morimoto No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines. Compatible: With many modern applications from Toyota, these complete fog light housings will swap in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications. Note about Fitment: For most Toyota / Lexus installs, these are a 100% direct fit in place of the stock fog lights. For certain fitments such as the 2014-2018 Toyota 4Runner, the mounting points are very close but not 100% identical to stock, so some minor trimming or adjustment of the plastic bracket on the Morimoto XB fog lights may be required. Plug n Play: Wiring is easy too! The XB LED fog lights are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. Powered: By three Philips Luxeon-T 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations. Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these Toyota fog lights and to date, have only seen one or two develop a problem...no joke!Tech SpecsINPUT SOCKET:Sealed H11 MaleWEATHER RATING:IP67 WaterproofLENS MATERIAL:High Impact Polycarb (UV-Resistant)SHELL / HEAT SINK:Powder Coated Cast AluminumLIGHT SOURCE:3x Philips Luxeon-TLED OPTICS:Kuria Fog-Projection LensINTENSITY:1,200lm (raw; each)COLOR:5500K (pure white)What's IncludedFOG LIGHTS:2x Type T2 Morimoto XB LEDWIRING:Plug-n-Play Connection KitOPTIONAL:Lamin-X Yellow Film KitWARRANTY:10 YearsCompatibilityREPLACES TOYOTA PART #:81210-AA030SEQUOIA:2008-2017SOLARA:2004-2006TACOMA:2005-2011TUNDRA:2007-2013CERTIFICATIONS:DOT, ECE, SAE

Morimoto XB LED Fogs: Type TOYOTA (ROUND) (Set / Black)

Code: LF361
$272.21 $226.84
In Stock
  • QUICK DELIVERY OPTIONS

  • FAST ORDER PROCESSING

  • SATISFACTION GUARANTEED

No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.

Compatible: With many modern applications from Toyota, these complete fog light housings will swap in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.

Note about Fitment: For most Toyota / Lexus installs, these are a 100% direct fit in place of the stock fog lights. For certain fitments such as the 2014-2018 Toyota 4Runner, the mounting points are very close but not 100% identical to stock, so some minor trimming or adjustment of the plastic bracket on the Morimoto XB fog lights may be required.

Plug n Play: Wiring is easy too! The XB LED fog lights are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

Powered: By three Philips Luxeon-T 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.

Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these Toyota fog lights and to date, have only seen one or two develop a problem...no joke!

Tech Specs

INPUT SOCKET:Sealed H11 Male

WEATHER RATING:IP67 Waterproof

LENS MATERIAL:High Impact Polycarb (UV-Resistant)

SHELL / HEAT SINK:Powder Coated Cast Aluminum

LIGHT SOURCE:3x Philips Luxeon-T

LED OPTICS:Kuria Fog-Projection Lens

INTENSITY:1,200lm (raw; each)

COLOR:5500K (pure white)

What's Included

FOG LIGHTS:2x Type T2 Morimoto XB LED

WIRING:Plug-n-Play Connection Kit

OPTIONAL:Lamin-X Yellow Film Kit

WARRANTY:10 Years

Compatibility

REPLACES TOYOTA PART #:81210-AA030

SEQUOIA:2008-2017

SOLARA:2004-2006

TACOMA:2005-2011

TUNDRA:2007-2013

CERTIFICATIONS:DOT, ECE, SAE

No Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto XB LED projector fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines.

Compatible: With many modern applications from Toyota, these complete fog light housings will swap in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications.

Note about Fitment: For most Toyota / Lexus installs, these are a 100% direct fit in place of the stock fog lights. For certain fitments such as the 2014-2018 Toyota 4Runner, the mounting points are very close but not 100% identical to stock, so some minor trimming or adjustment of the plastic bracket on the Morimoto XB fog lights may be required.

Plug n Play: Wiring is easy too! The XB LED fog lights are designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install.

Powered: By three Philips Luxeon-T 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet & exceed all SAE, DOT, and ECE regulations.

Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these Toyota fog lights and to date, have only seen one or two develop a problem...no joke!

Tech Specs

INPUT SOCKET:Sealed H11 Male

WEATHER RATING:IP67 Waterproof

LENS MATERIAL:High Impact Polycarb (UV-Resistant)

SHELL / HEAT SINK:Powder Coated Cast Aluminum

LIGHT SOURCE:3x Philips Luxeon-T

LED OPTICS:Kuria Fog-Projection Lens

INTENSITY:1,200lm (raw; each)

COLOR:5500K (pure white)

What's Included

FOG LIGHTS:2x Type T2 Morimoto XB LED

WIRING:Plug-n-Play Connection Kit

OPTIONAL:Lamin-X Yellow Film Kit

WARRANTY:10 Years

Compatibility

REPLACES TOYOTA PART #:81210-AA030

SEQUOIA:2008-2017

SOLARA:2004-2006

TACOMA:2005-2011

TUNDRA:2007-2013

CERTIFICATIONS:DOT, ECE, SAE

Shipping Overview

What is your shipping cutoff time? 

Cutoff time for in stock items is 2PM CST for items shipping with UPS.  USPS cutoff time is 10AM CST.   If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

 

Is shipping free? 

Orders over $149 qualify for free shipping within the lower 48 United States. We will select the most economical shipping option for our free shipping option.  If you'd like expedited service, please select that option during checkout.  Unfortunately, shipping to AK/HI or International we cannot offer free shipping, due to the extra costs incurred.  

 

How long will it take to get my stuff? 

Most in stock orders will ship the same day, if ordered before our cutoff times.  Custom items will ship when they are completed, please inquire for timelines on custom items (as this will vary).  We are located centrally in the US (St Louis MO) - so most items arrive within 2-4 days to the lower 48 US.  You will receive a tracking number when your item ships, allowing you to keep track of it at all times.  

 

I am an international customer, are fees / duties included in the shipping costs?

No, these fees will need to be paid by our international customers.  

 

How can I get a quote for shipping?

Please add the item in your cart and proceed through the checkout process. The system will display all the options we offer, along with a price. 

 

Refund / Exchanges

We have a 30-day return policy on non custom items, which means you have 30 days after receiving your item to request a return. 

To be eligible for a return, your item must be in the same condition that you received it, uninstalled and in its original packaging. You’ll also need the receipt or proof of purchase. 

To start a return, you can contact us at sales@retroshop.us. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. 

You can always contact us for any return question at sales@retroshop.us.

Damages and issues 
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Restocking Fees 
On non customized (returnable items), a restocking fee of 5-15% may be held from your refund.  Some items are special ordered in for customers, and if we have to return them to our suppliers, we may have a restocking fee for doing so.  If there are any questions on the restocking amount, please email us at sales@retroshop.us.

Exceptions / non-returnable items 
Certain types of items cannot be returned, like custom products (such as special orders or personalized items).  Please get in touch if you have questions or concerns about your specific item. 

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges 
Please contact us for any exchanges at sales@retroshop.us.

Shipping Charges
Shipping charges are not refunded.  If you selected our free shipping option, the amount we paid to ship the item to you will be deducted from your return.

Refunds 
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.