LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics Diode Dynamics HD Halo Technology. These HD LED semi-flex strips have been designed from the ground-up to be absolutely the brightest, most reliable strips physically possible. Each strip is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.Sizing: All sizes are listed by total length, in millimeters. Strips can be shortened by up to 20 percent, but no less! Width is 8mm, and total height is 4.5mm. Mounting: The strips must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The strips can be modified if needed to fit certain applications. Up to 20 percent of the strip can be removed using side-cutting snips and still remain fully functional. Wiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.PWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these strips is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows: White: White Low Power, 50 percent brightness Red: White High Power, 100 percent brightness Yellow: Amber Signal, double brightness, flashing (dims if powered more than two seconds) Black: Ground All input wires activate the strips, at different brightness levels. All switchback strips ship with inchlow inch priority drivers. This means that if both inchlow inch and inchhigh inch power inputs are powered, the LED will light up in white, with low power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the strip will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe. This entire setup allows you to connect the strip directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like. Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations.Specifications Triple 1 Inch kit Operating Voltage: 9-16V Operating Temperature: -40C to 85C (-40F to 185F) Connector(s): JST Inline Connectors, T-Tap Inputs Driver Dimensions: 2.5 inch x 1.38 inch x 0.88 inch In the Box: Three (3) LED semi-flex strips One (1) waterproof driver One (1) input wire pigtail Four (4) T-tap connectors Installation guide Warranty: 3 year warranty100 percent Satisfaction GuaranteeFitmentThese strips are intended for installation inside a sealed lamp housing. Included Quantity: One (1)
Diode Dynamics

LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics

Code: DD2137
Add Your Review
LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics
LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics
LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics LED Strip Lights High Density SF Switchback Triple 1 Inch Kit Diode Dynamics
$65.00 $64.95
In Stock

  • QUICK DELIVERY OPTIONS

  • FAST ORDER PROCESSING

  • SATISFACTION GUARANTEED

HD Halo Technology. These HD LED semi-flex strips have been designed from the ground-up to be absolutely the brightest, most reliable strips physically possible.

Each strip is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.
Sizing: All sizes are listed by total length, in millimeters. Strips can be shortened by up to 20 percent, but no less! Width is 8mm, and total height is 4.5mm.

Mounting: The strips must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The strips can be modified if needed to fit certain applications. Up to 20 percent of the strip can be removed using side-cutting snips and still remain fully functional.

Wiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.
PWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these strips is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:

  • White: White Low Power, 50 percent brightness
  • Red: White High Power, 100 percent brightness
  • Yellow: Amber Signal, double brightness, flashing (dims if powered more than two seconds)
  • Black: Ground

All input wires activate the strips, at different brightness levels. All switchback strips ship with inchlow inch priority drivers. This means that if both inchlow inch and inchhigh inch power inputs are powered, the LED will light up in white, with low power level.

This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the strip will light up in amber color, intended for signaling.

If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.

This entire setup allows you to connect the strip directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.

Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies.

We pride ourselves in offering only quality LED products, that will exceed your expectations.
Specifications

  • Triple 1 Inch kit
  • Operating Voltage: 9-16V
  • Operating Temperature: -40C to 85C (-40F to 185F)
  • Connector(s): JST Inline
  • Connectors, T-Tap Inputs
  • Driver Dimensions: 2.5 inch x 1.38 inch x 0.88 inch

In the Box:

  • Three (3) LED semi-flex strips
  • One (1) waterproof driver
  • One (1) input wire pigtail
  • Four (4) T-tap connectors
  • Installation guide

Warranty: 3 year warranty
100 percent Satisfaction Guarantee
Fitment
These strips are intended for installation inside a sealed lamp housing.

Included Quantity:

  • One (1)

HD Halo Technology. These HD LED semi-flex strips have been designed from the ground-up to be absolutely the brightest, most reliable strips physically possible.

Each strip is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.
Sizing: All sizes are listed by total length, in millimeters. Strips can be shortened by up to 20 percent, but no less! Width is 8mm, and total height is 4.5mm.

Mounting: The strips must be custom-mounted in position using adhesive or beading wire using the integrated mounting tabs. If you wish, mounting tabs may be removed with a pair of clippers or basic sanding. The strips can be modified if needed to fit certain applications. Up to 20 percent of the strip can be removed using side-cutting snips and still remain fully functional.

Wiring: All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.
PWM Control: Aside from the high brightness and perfectly uniform output, one great feature of these strips is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:

  • White: White Low Power, 50 percent brightness
  • Red: White High Power, 100 percent brightness
  • Yellow: Amber Signal, double brightness, flashing (dims if powered more than two seconds)
  • Black: Ground

All input wires activate the strips, at different brightness levels. All switchback strips ship with inchlow inch priority drivers. This means that if both inchlow inch and inchhigh inch power inputs are powered, the LED will light up in white, with low power level.

This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the strip will light up in amber color, intended for signaling.

If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.

This entire setup allows you to connect the strip directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.

Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies.

We pride ourselves in offering only quality LED products, that will exceed your expectations.
Specifications

  • Triple 1 Inch kit
  • Operating Voltage: 9-16V
  • Operating Temperature: -40C to 85C (-40F to 185F)
  • Connector(s): JST Inline
  • Connectors, T-Tap Inputs
  • Driver Dimensions: 2.5 inch x 1.38 inch x 0.88 inch

In the Box:

  • Three (3) LED semi-flex strips
  • One (1) waterproof driver
  • One (1) input wire pigtail
  • Four (4) T-tap connectors
  • Installation guide

Warranty: 3 year warranty
100 percent Satisfaction Guarantee
Fitment
These strips are intended for installation inside a sealed lamp housing.

Included Quantity:

  • One (1)

Shipping Overview

What is your shipping cutoff time? 

Cutoff time for in stock items is 2PM CST for items shipping with UPS.  USPS cutoff time is 10AM CST.   If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

 

Is shipping free? 

Orders over $149 qualify for free shipping within the lower 48 United States. We will select the most economical shipping option for our free shipping option.  If you'd like expedited service, please select that option during checkout.  Unfortunately, shipping to AK/HI or International we cannot offer free shipping, due to the extra costs incurred.  

 

How long will it take to get my stuff? 

Most in stock orders will ship the same day, if ordered before our cutoff times.  Custom items will ship when they are completed, please inquire for timelines on custom items (as this will vary).  We are located centrally in the US (St Louis MO) - so most items arrive within 2-4 days to the lower 48 US.  You will receive a tracking number when your item ships, allowing you to keep track of it at all times.  

 

I am an international customer, are fees / duties included in the shipping costs?

No, these fees will need to be paid by our international customers.  

 

How can I get a quote for shipping?

Please add the item in your cart and proceed through the checkout process. The system will display all the options we offer, along with a price. 

 

Refund / Exchanges

We have a 30-day return policy on non custom items, which means you have 30 days after receiving your item to request a return. 

To be eligible for a return, your item must be in the same condition that you received it, uninstalled and in its original packaging. You’ll also need the receipt or proof of purchase. 

To start a return, you can contact us at sales@retroshop.us. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. 

You can always contact us for any return question at sales@retroshop.us.

Damages and issues 
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Restocking Fees 
On non customized (returnable items), a restocking fee of 5-15% may be held from your refund.  Some items are special ordered in for customers, and if we have to return them to our suppliers, we may have a restocking fee for doing so.  If there are any questions on the restocking amount, please email us at sales@retroshop.us.

Exceptions / non-returnable items 
Certain types of items cannot be returned, like custom products (such as special orders or personalized items).  Please get in touch if you have questions or concerns about your specific item. 

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges 
Please contact us for any exchanges at sales@retroshop.us.

Shipping Charges
Shipping charges are not refunded.  If you selected our free shipping option, the amount we paid to ship the item to you will be deducted from your return.

Refunds 
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.