4G Ram Projector Light Builder 4G Ram Projector Light Builder RetroShopLLC Looking for a custom set of '13+ Ram lights? All the options are here! From mild to wild, this is the tool to build it from!   The one stop shop for custom Ram lights! This light building tool features each of our options for the 2013+ Ram projector lights. Continue reading to see details on each option, and as always - if there are any questions, don't hesitate to contact us. Please note, this tool is exclusively for the 2013+ projector style headlights. The base cost of the lights includes the labor for us to open your headlights, remove the original sealant, reseal with retro rubber, and ship the lights back to you in continental US (shipping is available to anywhere in the world, if your country isn't listed during checkout, please contact us for a shipping quote). From here, each option is listed, so you can fine tune the lights to your needs. Headlights: In this section you can select to send in your headlights, or we can start with a set of replica replacement lights. If you are sending in your lights, please note that we are in St Louis, MO - shipping of your lights to our shop is on the customer, as is proper packing and insuring the lights. We stock replica replacement lights as well, for those that are not sending in headlights for us to use. These lights look and perform just like the stock units, but do not have the "RAM" lettering on the lens, or the Ram logo on the shrouds. Please note, the black replica lights are based on the '13-14 lights, where the projector shroud is chrome (not fully black like the 2015+ OEM models). Examples of the lights used for the builds: PNP Adapter: Using our exclusive plug n play adapter, these 2013+ lights can be fitted to any 4th Gen Ram that did not come with the projector style lights from the factory. The adapter will come with 1 set compatible with your truck. Simply plug in the adapter, all set! Paint: Here, we can paint the lights to fit the style you are after. At RetroShop, we have a full time painter on staff, Dave (our painter) has over 20 years experience in the automotive paint industry and has painted over 1,000 sets of lights for us. We only use automotive grade paint / clear, just like what is used on the vehicle from the factory. We do NOT use spray cans, rattle bombs, etc. We do not use "VHT" or any other inferior products on our builds. Each part is media blasted for proper paint adhesion, primered, base coat / cleared, and buffed. We have many options on paint, and can get them exactly how you'd like yours. Please note, for ANY paint job, we will not paint the inner part of the shrouds. This inner part, when painted, will melt! This is seen on the 2015+ OEM lights as well - its not a paint issue, its simply due to the magnifying glass effect that the projector has on the shrouds. The light doesn't reflect off of a non chrome surface, and the shroud then will melt. Some pictures below show the entire shrouds painted, this was done before we where aware of this issue. If you just can't have this small amount of chrome left on the lights, you can tell us to paint it - but we will not warranty these, as we know what the outcome will be. Blackout - we start with your Sport (black) lights, or our replica black lights and we complete the blackout theme. We paint the shrouds gloss black and tint the amber and lower LED cover in a candy black. Blackout example: OEM paint matching - for your single color needs, we paint the inner bezel to match your truck. If you want the side amber painted, lower LED cover, etc - we can do that as well, just make a note of this in the notes section. Few examples: Dual Color paint: On these builds, we combine any 2 colors that you are after, for a fully custom set of lights! As there are many many different ways to do these, please make sure you put in the notes what parts you want painted in each color. If you have a specific build you are wanting to duplicate, please email us pics! A few examples: Clear corner: We have the option to remove the amber reflector and install a clear replacement. Example: Halos / LEDs, Turn signal: We can replace the amber turn signal with one of two amazing products from Diode Dynamics. We have the white / amber switcbacks, or RGBWA switchbacks. White / amber - the parking lights are white, turn signals are amber. DRLs (if your truck is equipped) are also white. A quick YouTube video of them in action: Here is another video explaining the differences in the switchback or sequential options: And the mighty RGBWA option, which gives you the option to change the color of your parking lights to any color, while providing a white option for normal (driving) use. When the turn signals are activated, they flash amber. A video of these, also showing the RGB halos and strips (more info on those below): Halos / LEDs, halos: Here we have 2 options to further your customization. The Diode Dynamics Ram Halo / C Bars (switchback) option will give you white halos with amber turn signals (these are wired internally, no additional wiring is needed). The video below shows the halos / c bars in conjunction with the turn signal replacement boards: The RGB Halos / strips will give you the color changing ability (see video above with the RGBWA lower replacement boards for more information). These halos will come with a RF remote control to set the colors (7 standard, and the ability to dial in a color and set it as a preset). These halos will require a 12v power source, though most will splice to the parking lights on the truck (just remember, some colors may not be legal for on road use). Halos / LEDs, demon eyes: Demon eyes will give you that evil look for the shows! This product is only used when the headlights are off, and will make the projector "glow" in that color. Here is a video explaining their function: HID Upgrades: In this section you can upgrade the light output from the stock halogens. We have 2 options, a drop in kit (which consists of a set of bulbs, ballasts and wiring (of your choice) for the stock projectors), or the mighty FX-R projector retrofit, which will give you the ultimate in light output - without blinding oncoming drivers. Below are 2 pictures, both with the same 35W ballasts and 5K bulbs. Drop in kit, much better than stock halogens! Cutoff is a little fuzzy, but still focused light. This will give you approx 2-3x more light than the standard halogen bulbs. FX-R output, sharp cutoff, more intense light with a wider beam. Want to see them in action? Check this video out! HID Harness Type: Depending on the year of your Ram, there are a few options for how we power the HIDs. If the truck is a 09-14, you can use the Canbus adapter, or the Mopar Spec Relay'd harness. Each operates the same! Your choice on if you want a full pnp option, vs a relay harness for your lights. How does the wiring look? See below (keep in mind, all show with the dust caps removed for picture purposes, the dust caps will be installed when the lights are sent out). Canbus adapter: For the 2015 or newer Rams, the only option is the 15+ Mopar Spec relay harness. This harness includes the "right stuff" for these Rams, as the 15+ is the most picky! Please note, it doesn't matter if you are getting a drop in kit or the FX-R retrofit, the same harness is used for either.  Whew, lots to take in! Each set is built to YOUR specifications and needs! Please, again - if you have ANY questions whatsoever for your build, don't hesitate to reach out for assistance! Our contact info is found at the top of the page under the "Contact us" section.
RetroShopLLC

4G Ram Projector Light Builder

Code: 4G.PRJ.CUST
Add Your Review
4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder
4G Ram Projector Light Builder
4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder 4G Ram Projector Light Builder
$400.00
In Stock

  • QUICK DELIVERY OPTIONS

  • FAST ORDER PROCESSING

  • SATISFACTION GUARANTEED

Looking for a custom set of '13+ Ram lights? All the options are here! From mild to wild, this is the tool to build it from!  

The one stop shop for custom Ram lights!

This light building tool features each of our options for the 2013+ Ram projector lights. Continue reading to see details on each option, and as always - if there are any questions, don't hesitate to contact us. Please note, this tool is exclusively for the 2013+ projector style headlights.

The base cost of the lights includes the labor for us to open your headlights, remove the original sealant, reseal with retro rubber, and ship the lights back to you in continental US (shipping is available to anywhere in the world, if your country isn't listed during checkout, please contact us for a shipping quote). From here, each option is listed, so you can fine tune the lights to your needs.

Headlights:

In this section you can select to send in your headlights, or we can start with a set of replica replacement lights. If you are sending in your lights, please note that we are in St Louis, MO - shipping of your lights to our shop is on the customer, as is proper packing and insuring the lights. We stock replica replacement lights as well, for those that are not sending in headlights for us to use. These lights look and perform just like the stock units, but do not have the "RAM" lettering on the lens, or the Ram logo on the shrouds. Please note, the black replica lights are based on the '13-14 lights, where the projector shroud is chrome (not fully black like the 2015+ OEM models). Examples of the lights used for the builds:

PNP Adapter:

Using our exclusive plug n play adapter, these 2013+ lights can be fitted to any 4th Gen Ram that did not come with the projector style lights from the factory. The adapter will come with 1 set compatible with your truck. Simply plug in the adapter, all set!

Paint:

Here, we can paint the lights to fit the style you are after. At RetroShop, we have a full time painter on staff, Dave (our painter) has over 20 years experience in the automotive paint industry and has painted over 1,000 sets of lights for us. We only use automotive grade paint / clear, just like what is used on the vehicle from the factory. We do NOT use spray cans, rattle bombs, etc. We do not use "VHT" or any other inferior products on our builds. Each part is media blasted for proper paint adhesion, primered, base coat / cleared, and buffed.

We have many options on paint, and can get them exactly how you'd like yours. Please note, for ANY paint job, we will not paint the inner part of the shrouds. This inner part, when painted, will melt! This is seen on the 2015+ OEM lights as well - its not a paint issue, its simply due to the magnifying glass effect that the projector has on the shrouds. The light doesn't reflect off of a non chrome surface, and the shroud then will melt. Some pictures below show the entire shrouds painted, this was done before we where aware of this issue. If you just can't have this small amount of chrome left on the lights, you can tell us to paint it - but we will not warranty these, as we know what the outcome will be.

Blackout - we start with your Sport (black) lights, or our replica black lights and we complete the blackout theme. We paint the shrouds gloss black and tint the amber and lower LED cover in a candy black. Blackout example:

OEM paint matching - for your single color needs, we paint the inner bezel to match your truck. If you want the side amber painted, lower LED cover, etc - we can do that as well, just make a note of this in the notes section. Few examples:

Dual Color paint:

On these builds, we combine any 2 colors that you are after, for a fully custom set of lights! As there are many many different ways to do these, please make sure you put in the notes what parts you want painted in each color. If you have a specific build you are wanting to duplicate, please email us pics! A few examples:

Clear corner:

We have the option to remove the amber reflector and install a clear replacement. Example:

Halos / LEDs, Turn signal:

We can replace the amber turn signal with one of two amazing products from Diode Dynamics. We have the white / amber switcbacks, or RGBWA switchbacks.

White / amber - the parking lights are white, turn signals are amber. DRLs (if your truck is equipped) are also white. A quick YouTube video of them in action:

Here is another video explaining the differences in the switchback or sequential options:

And the mighty RGBWA option, which gives you the option to change the color of your parking lights to any color, while providing a white option for normal (driving) use. When the turn signals are activated, they flash amber. A video of these, also showing the RGB halos and strips (more info on those below):

Halos / LEDs, halos:

Here we have 2 options to further your customization. The Diode Dynamics Ram Halo / C Bars (switchback) option will give you white halos with amber turn signals (these are wired internally, no additional wiring is needed). The video below shows the halos / c bars in conjunction with the turn signal replacement boards:

The RGB Halos / strips will give you the color changing ability (see video above with the RGBWA lower replacement boards for more information). These halos will come with a RF remote control to set the colors (7 standard, and the ability to dial in a color and set it as a preset). These halos will require a 12v power source, though most will splice to the parking lights on the truck (just remember, some colors may not be legal for on road use).

Halos / LEDs, demon eyes:

Demon eyes will give you that evil look for the shows! This product is only used when the headlights are off, and will make the projector "glow" in that color. Here is a video explaining their function:

HID Upgrades:

In this section you can upgrade the light output from the stock halogens. We have 2 options, a drop in kit (which consists of a set of bulbs, ballasts and wiring (of your choice) for the stock projectors), or the mighty FX-R projector retrofit, which will give you the ultimate in light output - without blinding oncoming drivers. Below are 2 pictures, both with the same 35W ballasts and 5K bulbs.

Drop in kit, much better than stock halogens! Cutoff is a little fuzzy, but still focused light. This will give you approx 2-3x more light than the standard halogen bulbs.

FX-R output, sharp cutoff, more intense light with a wider beam.

Want to see them in action? Check this video out!

HID Harness Type:

Depending on the year of your Ram, there are a few options for how we power the HIDs.

If the truck is a 09-14, you can use the Canbus adapter, or the Mopar Spec Relay'd harness. Each operates the same! Your choice on if you want a full pnp option, vs a relay harness for your lights.

How does the wiring look? See below (keep in mind, all show with the dust caps removed for picture purposes, the dust caps will be installed when the lights are sent out).

Canbus adapter:

For the 2015 or newer Rams, the only option is the 15+ Mopar Spec relay harness. This harness includes the "right stuff" for these Rams, as the 15+ is the most picky!

Please note, it doesn't matter if you are getting a drop in kit or the FX-R retrofit, the same harness is used for either.

 Whew, lots to take in! Each set is built to YOUR specifications and needs! Please, again - if you have ANY questions whatsoever for your build, don't hesitate to reach out for assistance! Our contact info is found at the top of the page under the "Contact us" section.

Looking for a custom set of '13+ Ram lights? All the options are here! From mild to wild, this is the tool to build it from!  

The one stop shop for custom Ram lights!

This light building tool features each of our options for the 2013+ Ram projector lights. Continue reading to see details on each option, and as always - if there are any questions, don't hesitate to contact us. Please note, this tool is exclusively for the 2013+ projector style headlights.

The base cost of the lights includes the labor for us to open your headlights, remove the original sealant, reseal with retro rubber, and ship the lights back to you in continental US (shipping is available to anywhere in the world, if your country isn't listed during checkout, please contact us for a shipping quote). From here, each option is listed, so you can fine tune the lights to your needs.

Headlights:

In this section you can select to send in your headlights, or we can start with a set of replica replacement lights. If you are sending in your lights, please note that we are in St Louis, MO - shipping of your lights to our shop is on the customer, as is proper packing and insuring the lights. We stock replica replacement lights as well, for those that are not sending in headlights for us to use. These lights look and perform just like the stock units, but do not have the "RAM" lettering on the lens, or the Ram logo on the shrouds. Please note, the black replica lights are based on the '13-14 lights, where the projector shroud is chrome (not fully black like the 2015+ OEM models). Examples of the lights used for the builds:

PNP Adapter:

Using our exclusive plug n play adapter, these 2013+ lights can be fitted to any 4th Gen Ram that did not come with the projector style lights from the factory. The adapter will come with 1 set compatible with your truck. Simply plug in the adapter, all set!

Paint:

Here, we can paint the lights to fit the style you are after. At RetroShop, we have a full time painter on staff, Dave (our painter) has over 20 years experience in the automotive paint industry and has painted over 1,000 sets of lights for us. We only use automotive grade paint / clear, just like what is used on the vehicle from the factory. We do NOT use spray cans, rattle bombs, etc. We do not use "VHT" or any other inferior products on our builds. Each part is media blasted for proper paint adhesion, primered, base coat / cleared, and buffed.

We have many options on paint, and can get them exactly how you'd like yours. Please note, for ANY paint job, we will not paint the inner part of the shrouds. This inner part, when painted, will melt! This is seen on the 2015+ OEM lights as well - its not a paint issue, its simply due to the magnifying glass effect that the projector has on the shrouds. The light doesn't reflect off of a non chrome surface, and the shroud then will melt. Some pictures below show the entire shrouds painted, this was done before we where aware of this issue. If you just can't have this small amount of chrome left on the lights, you can tell us to paint it - but we will not warranty these, as we know what the outcome will be.

Blackout - we start with your Sport (black) lights, or our replica black lights and we complete the blackout theme. We paint the shrouds gloss black and tint the amber and lower LED cover in a candy black. Blackout example:

OEM paint matching - for your single color needs, we paint the inner bezel to match your truck. If you want the side amber painted, lower LED cover, etc - we can do that as well, just make a note of this in the notes section. Few examples:

Dual Color paint:

On these builds, we combine any 2 colors that you are after, for a fully custom set of lights! As there are many many different ways to do these, please make sure you put in the notes what parts you want painted in each color. If you have a specific build you are wanting to duplicate, please email us pics! A few examples:

Clear corner:

We have the option to remove the amber reflector and install a clear replacement. Example:

Halos / LEDs, Turn signal:

We can replace the amber turn signal with one of two amazing products from Diode Dynamics. We have the white / amber switcbacks, or RGBWA switchbacks.

White / amber - the parking lights are white, turn signals are amber. DRLs (if your truck is equipped) are also white. A quick YouTube video of them in action:

Here is another video explaining the differences in the switchback or sequential options:

And the mighty RGBWA option, which gives you the option to change the color of your parking lights to any color, while providing a white option for normal (driving) use. When the turn signals are activated, they flash amber. A video of these, also showing the RGB halos and strips (more info on those below):

Halos / LEDs, halos:

Here we have 2 options to further your customization. The Diode Dynamics Ram Halo / C Bars (switchback) option will give you white halos with amber turn signals (these are wired internally, no additional wiring is needed). The video below shows the halos / c bars in conjunction with the turn signal replacement boards:

The RGB Halos / strips will give you the color changing ability (see video above with the RGBWA lower replacement boards for more information). These halos will come with a RF remote control to set the colors (7 standard, and the ability to dial in a color and set it as a preset). These halos will require a 12v power source, though most will splice to the parking lights on the truck (just remember, some colors may not be legal for on road use).

Halos / LEDs, demon eyes:

Demon eyes will give you that evil look for the shows! This product is only used when the headlights are off, and will make the projector "glow" in that color. Here is a video explaining their function:

HID Upgrades:

In this section you can upgrade the light output from the stock halogens. We have 2 options, a drop in kit (which consists of a set of bulbs, ballasts and wiring (of your choice) for the stock projectors), or the mighty FX-R projector retrofit, which will give you the ultimate in light output - without blinding oncoming drivers. Below are 2 pictures, both with the same 35W ballasts and 5K bulbs.

Drop in kit, much better than stock halogens! Cutoff is a little fuzzy, but still focused light. This will give you approx 2-3x more light than the standard halogen bulbs.

FX-R output, sharp cutoff, more intense light with a wider beam.

Want to see them in action? Check this video out!

HID Harness Type:

Depending on the year of your Ram, there are a few options for how we power the HIDs.

If the truck is a 09-14, you can use the Canbus adapter, or the Mopar Spec Relay'd harness. Each operates the same! Your choice on if you want a full pnp option, vs a relay harness for your lights.

How does the wiring look? See below (keep in mind, all show with the dust caps removed for picture purposes, the dust caps will be installed when the lights are sent out).

Canbus adapter:

For the 2015 or newer Rams, the only option is the 15+ Mopar Spec relay harness. This harness includes the "right stuff" for these Rams, as the 15+ is the most picky!

Please note, it doesn't matter if you are getting a drop in kit or the FX-R retrofit, the same harness is used for either.

 Whew, lots to take in! Each set is built to YOUR specifications and needs! Please, again - if you have ANY questions whatsoever for your build, don't hesitate to reach out for assistance! Our contact info is found at the top of the page under the "Contact us" section.

Shipping Overview

What is your shipping cutoff time? 

Cutoff time for in stock items is 2PM CST for items shipping with UPS.  USPS cutoff time is 10AM CST.   If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

 

Is shipping free? 

Orders over $149 qualify for free shipping within the lower 48 United States. We will select the most economical shipping option for our free shipping option.  If you'd like expedited service, please select that option during checkout.  Unfortunately, shipping to AK/HI or International we cannot offer free shipping, due to the extra costs incurred.  

 

How long will it take to get my stuff? 

Most in stock orders will ship the same day, if ordered before our cutoff times.  Custom items will ship when they are completed, please inquire for timelines on custom items (as this will vary).  We are located centrally in the US (St Louis MO) - so most items arrive within 2-4 days to the lower 48 US.  You will receive a tracking number when your item ships, allowing you to keep track of it at all times.  

 

I am an international customer, are fees / duties included in the shipping costs?

No, these fees will need to be paid by our international customers.  

 

How can I get a quote for shipping?

Please add the item in your cart and proceed through the checkout process. The system will display all the options we offer, along with a price. 

 

Refund / Exchanges

We have a 30-day return policy on non custom items, which means you have 30 days after receiving your item to request a return. 

To be eligible for a return, your item must be in the same condition that you received it, uninstalled and in its original packaging. You’ll also need the receipt or proof of purchase. 

To start a return, you can contact us at sales@retroshop.us. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. 

You can always contact us for any return question at sales@retroshop.us.

Damages and issues 
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Restocking Fees 
On non customized (returnable items), a restocking fee of 5-15% may be held from your refund.  Some items are special ordered in for customers, and if we have to return them to our suppliers, we may have a restocking fee for doing so.  If there are any questions on the restocking amount, please email us at sales@retroshop.us.

Exceptions / non-returnable items 
Certain types of items cannot be returned, like custom products (such as special orders or personalized items).  Please get in touch if you have questions or concerns about your specific item. 

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges 
Please contact us for any exchanges at sales@retroshop.us.

Shipping Charges
Shipping charges are not refunded.  If you selected our free shipping option, the amount we paid to ship the item to you will be deducted from your return.

Refunds 
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.