Reverse Light: XTR LP Module Reverse Light: XTR LP Module Xenon Depot Back it Up: Up front we've already got bright low beams, high beams, and fog lights, but too often overlooked is our ability to see well while backing up in the dark. While there are plenty of LED bulb upgrades out there for stock reverse lights; when it comes to a backup light boost there's simply no comparison to the XTR LP. Engineered: The XTR LP is the only system on the market that leverages optical refinement over raw power to produce the perfect reverse light beam pattern. We started by understanding the most typical installation angles and then optimized the lens to distribute the most possible light in the most effective pattern. To pack a real punch, the XTR LP packs more than just a lot of LED's into a line on the back of car. It's a fully engineered product. What's Inside: 54 CREE J Series 2835 LEDs rated at 4500K/80CRI. 180mA driver produces 29.9W of maximum power pumps out 2700 raw lumens that's translated into 1950 real lumens after transmission through the optical lens. Technically Speaking: At a 10-degree mounting angle, the vertical range is -20 to +25 degrees. At the most typical 0-degree mounting angle, the XTR LP provides a -30 to +15 degree vertical spread, which easily exceeds the illumination range of any standard backup for spread. Users should acknowledge that this product far exceeds the legal limit for output volume in a reverse light application. Bolt-On: The XTR LP will bolt onto your vehicle's top two license plate mounts. Its die-cast aluminum housing is contoured according to the geometry of US-spec license plates for a flush fit, and the mounting points are positioned according to the same universal standard. The system is finished in a satin black powder coat. Wiring:The XTR LP is powered on with a simple +/- 12v circuit that's intended to tap in to your stock reverse light wiring. The system includes 1.5 meters of integrated wiring that can be trimmed back according to your application, a quick-disconnect for ease of install, and an integrated rubber grommet to keep moisture and dust out of a pass-through hole if necessary. Intensity: 2,700lm (Raw), 1,950lm (Effective) Light Source: 54X CREE J Series (2835) 4500K / 80CRI Power: 29W Optical Focus: -30 to +15 Degree Vertical Range ELECTRICAL: 9-16V (Polarity-free) Warranty: 5 Years

Reverse Light: XTR LP Module

Code: XD.LED400
$100.49 $83.74
In Stock
  • QUICK DELIVERY OPTIONS

  • FAST ORDER PROCESSING

  • SATISFACTION GUARANTEED

Back it Up: Up front we've already got bright low beams, high beams, and fog lights, but too often overlooked is our ability to see well while backing up in the dark. While there are plenty of LED bulb upgrades out there for stock reverse lights; when it comes to a backup light boost there's simply no comparison to the XTR LP.

Engineered: The XTR LP is the only system on the market that leverages optical refinement over raw power to produce the perfect reverse light beam pattern. We started by understanding the most typical installation angles and then optimized the lens to distribute the most possible light in the most effective pattern. To pack a real punch, the XTR LP packs more than just a lot of LED's into a line on the back of car. It's a fully engineered product.

What's Inside: 54 CREE J Series 2835 LEDs rated at 4500K/80CRI. 180mA driver produces 29.9W of maximum power pumps out 2700 raw lumens that's translated into 1950 real lumens after transmission through the optical lens.

Technically Speaking: At a 10-degree mounting angle, the vertical range is -20 to +25 degrees. At the most typical 0-degree mounting angle, the XTR LP provides a -30 to +15 degree vertical spread, which easily exceeds the illumination range of any standard backup for spread. Users should acknowledge that this product far exceeds the legal limit for output volume in a reverse light application.

Bolt-On: The XTR LP will bolt onto your vehicle's top two license plate mounts. Its die-cast aluminum housing is contoured according to the geometry of US-spec license plates for a flush fit, and the mounting points are positioned according to the same universal standard. The system is finished in a satin black powder coat.

Wiring:The XTR LP is powered on with a simple +/- 12v circuit that's intended to tap in to your stock reverse light wiring. The system includes 1.5 meters of integrated wiring that can be trimmed back according to your application, a quick-disconnect for ease of install, and an integrated rubber grommet to keep moisture and dust out of a pass-through hole if necessary.

Intensity: 2,700lm (Raw), 1,950lm (Effective)

Light Source: 54X CREE J Series (2835) 4500K / 80CRI

Power: 29W

Optical Focus: -30 to +15 Degree Vertical Range

ELECTRICAL: 9-16V (Polarity-free)

Warranty: 5 Years

Back it Up: Up front we've already got bright low beams, high beams, and fog lights, but too often overlooked is our ability to see well while backing up in the dark. While there are plenty of LED bulb upgrades out there for stock reverse lights; when it comes to a backup light boost there's simply no comparison to the XTR LP.

Engineered: The XTR LP is the only system on the market that leverages optical refinement over raw power to produce the perfect reverse light beam pattern. We started by understanding the most typical installation angles and then optimized the lens to distribute the most possible light in the most effective pattern. To pack a real punch, the XTR LP packs more than just a lot of LED's into a line on the back of car. It's a fully engineered product.

What's Inside: 54 CREE J Series 2835 LEDs rated at 4500K/80CRI. 180mA driver produces 29.9W of maximum power pumps out 2700 raw lumens that's translated into 1950 real lumens after transmission through the optical lens.

Technically Speaking: At a 10-degree mounting angle, the vertical range is -20 to +25 degrees. At the most typical 0-degree mounting angle, the XTR LP provides a -30 to +15 degree vertical spread, which easily exceeds the illumination range of any standard backup for spread. Users should acknowledge that this product far exceeds the legal limit for output volume in a reverse light application.

Bolt-On: The XTR LP will bolt onto your vehicle's top two license plate mounts. Its die-cast aluminum housing is contoured according to the geometry of US-spec license plates for a flush fit, and the mounting points are positioned according to the same universal standard. The system is finished in a satin black powder coat.

Wiring:The XTR LP is powered on with a simple +/- 12v circuit that's intended to tap in to your stock reverse light wiring. The system includes 1.5 meters of integrated wiring that can be trimmed back according to your application, a quick-disconnect for ease of install, and an integrated rubber grommet to keep moisture and dust out of a pass-through hole if necessary.

Intensity: 2,700lm (Raw), 1,950lm (Effective)

Light Source: 54X CREE J Series (2835) 4500K / 80CRI

Power: 29W

Optical Focus: -30 to +15 Degree Vertical Range

ELECTRICAL: 9-16V (Polarity-free)

Warranty: 5 Years

Shipping Overview

What is your shipping cutoff time? 

Cutoff time for in stock items is 2PM CST for items shipping with UPS.  USPS cutoff time is 10AM CST.   If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

 

Is shipping free? 

Orders over $149 qualify for free shipping within the lower 48 United States. We will select the most economical shipping option for our free shipping option.  If you'd like expedited service, please select that option during checkout.  Unfortunately, shipping to AK/HI or International we cannot offer free shipping, due to the extra costs incurred.  

 

How long will it take to get my stuff? 

Most in stock orders will ship the same day, if ordered before our cutoff times.  Custom items will ship when they are completed, please inquire for timelines on custom items (as this will vary).  We are located centrally in the US (St Louis MO) - so most items arrive within 2-4 days to the lower 48 US.  You will receive a tracking number when your item ships, allowing you to keep track of it at all times.  

 

I am an international customer, are fees / duties included in the shipping costs?

No, these fees will need to be paid by our international customers.  

 

How can I get a quote for shipping?

Please add the item in your cart and proceed through the checkout process. The system will display all the options we offer, along with a price. 

 

Refund / Exchanges

We have a 30-day return policy on non custom items, which means you have 30 days after receiving your item to request a return. 

To be eligible for a return, your item must be in the same condition that you received it, uninstalled and in its original packaging. You’ll also need the receipt or proof of purchase. 

To start a return, you can contact us at sales@retroshop.us. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. 

You can always contact us for any return question at sales@retroshop.us.

Damages and issues 
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Restocking Fees 
On non customized (returnable items), a restocking fee of 5-15% may be held from your refund.  Some items are special ordered in for customers, and if we have to return them to our suppliers, we may have a restocking fee for doing so.  If there are any questions on the restocking amount, please email us at sales@retroshop.us.

Exceptions / non-returnable items 
Certain types of items cannot be returned, like custom products (such as special orders or personalized items).  Please get in touch if you have questions or concerns about your specific item. 

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges 
Please contact us for any exchanges at sales@retroshop.us.

Shipping Charges
Shipping charges are not refunded.  If you selected our free shipping option, the amount we paid to ship the item to you will be deducted from your return.

Refunds 
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.