4G Ram Quads - Custom Light Builder 4G Ram Quads - Custom Light Builder RetroShopLLC The one stop shop for custom Ram Quad lights! This light building tool features each of our options for the 2009+ Ram projector lights. Continue reading to see details on each option, and as always - if there are any questions, don't hesitate to contact us. Please note, this tool is exclusively for the 2009+ quad style headlights. The base cost of the lights includes the labor for us to open your headlights, remove the original sealant, reseal with retro rubber, and ship the lights back to you in continental US (shipping is available to anywhere in the world, if your country isn't listed during checkout, please contact us for a shipping quote). From here, each option is listed, so you can fine tune the lights to your needs. Headlights: In this section you can select to send in your headlights, or we can start with a set of OEM lights. If you are sending in your lights, please note that we are in St Louis, MO - shipping of your lights to our shop is on the customer, as is proper packing and insuring the lights. We stock lights as well, for those that are not sending in headlights for us to use. Examples of the lights used for the builds: OEM Headlights - these are sourced locally from the dealership. Only difference is the finish, chrome or black. These are the exact lights that come on these trucks from the factory, great quality! Paint: Here, we can paint the lights to fit the style you are after. At RetroShop, we have a full time painter on staff, Dave (our painter) has over 20 years experience in the automotive paint industry and has painted over 1,000 sets of lights for us. We only use automotive grade paint / clear, just like what is used on the vehicle from the factory. We do NOT use spray cans, rattle bombs, etc. We do not use "VHT" or any other inferior products on our builds. Each part is media blasted for proper paint adhesion, primered, base coat / cleared, and buffed. We have many options on paint, and can get them exactly how you'd like yours. OEM paint matching - for your single color needs, we paint the inner bezel to match your truck. If you want the side amber painted or tinted, etc - we can do that as well, just make a note of this in the notes section. Few examples: Dual Color paint: On these builds, we combine any 2 colors that you are after, for a fully custom set of lights! As there are many many different ways to do these, please make sure you put in the notes what parts you want painted in each color. If you have a specific build you are wanting to duplicate, please email us pics! A few examples: Clear corner: We have the option to remove the amber reflector and install a clear replacement. Example: Halos: We have 6 options for customizing the Quad lights with halos.  Please note, round halos are only available with the projector options (as they mount to the projector shrouds).   RGB color changing, these halos will come with a bluetooth remote control to set the colors . These halos will require a 12v power source, though most will splice to the parking lights on the truck (just remember, most colors may not be legal for on road use).   Video showing these in action: Diode Dynamics Switchback halo options are our most popular setup!  This set shows both the quad and round halos.  These are white for parking lights and flash amber for turn signals.  You can select just the outer halo (Quad), the inner (round, if doing a retrofit) or both - depending on your needs.   2 videos, showing switchback halos: Demon eyes: Demon eyes will give you that evil look for the shows! This product is only used when the headlights are off, and will make the projector "glow" in that color. Please see pics / video above showing demon eyes in use. Please note, demon eyes are only an option if you do a projector retrofit.` HID Upgrades: In this section you can upgrade the light output from the stock halogens. We have a few options, a drop in kit (which consists of a set of bulbs, ballasts and wiring (of your choice) for the stock projectors), or projector retrofitting, which gives the best output - without blinding oncoming drivers. Drop in kit, much better than stock halogens! Cutoff is a little fuzzy, but still focused light. This will give you approx 2-3x more light than the standard halogen bulbs. With the projector retrofits, the output will be more focused, much wider beam of light. Below is an output shot of the Mini H1 projectors in the Ram quad lights.  Our D2S upgrade will give more intensity and a wider beam of light.  The MLED option keeps all wiring internal to the headlight, and will give exceptional output as well (in between the H1 and D2S projectors) HID Harness Type: How does the wiring look? See below (keep in mind, all show with the dust caps removed for picture purposes, the dust caps will be installed when the lights are sent out). Canbus adapter:  For the 2015 or newer Rams, the only option is the 15+ Mopar Spec relay harness. This harness includes the "right stuff" for these Rams, as the 15+ is the most picky! Please note, it doesn't matter if you are getting a drop in kit or a retrofit, the same harness is used for either. Whew, lots to take in! Each set is built to YOUR specifications and needs! Please, again - if you have ANY questions whatsoever for your build, don't hesitate to reach out for assistance! Our contact info is found at the top of the page under the "Contact us" section.

4G Ram Quads - Custom Light Builder

Code: 4G.QD.CUST
$350.00
In Stock
  • QUICK DELIVERY OPTIONS

  • FAST ORDER PROCESSING

  • SATISFACTION GUARANTEED

The one stop shop for custom Ram Quad lights!

This light building tool features each of our options for the 2009+ Ram projector lights. Continue reading to see details on each option, and as always - if there are any questions, don't hesitate to contact us. Please note, this tool is exclusively for the 2009+ quad style headlights.

The base cost of the lights includes the labor for us to open your headlights, remove the original sealant, reseal with retro rubber, and ship the lights back to you in continental US (shipping is available to anywhere in the world, if your country isn't listed during checkout, please contact us for a shipping quote). From here, each option is listed, so you can fine tune the lights to your needs.

Headlights:

In this section you can select to send in your headlights, or we can start with a set of OEM lights. If you are sending in your lights, please note that we are in St Louis, MO - shipping of your lights to our shop is on the customer, as is proper packing and insuring the lights. We stock lights as well, for those that are not sending in headlights for us to use. Examples of the lights used for the builds:

OEM Headlights - these are sourced locally from the dealership. Only difference is the finish, chrome or black. These are the exact lights that come on these trucks from the factory, great quality!

Paint:

Here, we can paint the lights to fit the style you are after. At RetroShop, we have a full time painter on staff, Dave (our painter) has over 20 years experience in the automotive paint industry and has painted over 1,000 sets of lights for us. We only use automotive grade paint / clear, just like what is used on the vehicle from the factory. We do NOT use spray cans, rattle bombs, etc. We do not use "VHT" or any other inferior products on our builds. Each part is media blasted for proper paint adhesion, primered, base coat / cleared, and buffed.

We have many options on paint, and can get them exactly how you'd like yours.

OEM paint matching - for your single color needs, we paint the inner bezel to match your truck. If you want the side amber painted or tinted, etc - we can do that as well, just make a note of this in the notes section. Few examples:

Dual Color paint:

On these builds, we combine any 2 colors that you are after, for a fully custom set of lights! As there are many many different ways to do these, please make sure you put in the notes what parts you want painted in each color. If you have a specific build you are wanting to duplicate, please email us pics! A few examples:

Clear corner:

We have the option to remove the amber reflector and install a clear replacement. Example:

Halos:

We have 6 options for customizing the Quad lights with halos.  Please note, round halos are only available with the projector options (as they mount to the projector shrouds).  

RGB color changing, these halos will come with a bluetooth remote control to set the colors . These halos will require a 12v power source, though most will splice to the parking lights on the truck (just remember, most colors may not be legal for on road use).

 

Video showing these in action:

Diode Dynamics Switchback halo options are our most popular setup!  This set shows both the quad and round halos.  These are white for parking lights and flash amber for turn signals.  You can select just the outer halo (Quad), the inner (round, if doing a retrofit) or both - depending on your needs.  

2 videos, showing switchback halos:

Demon eyes:

Demon eyes will give you that evil look for the shows! This product is only used when the headlights are off, and will make the projector "glow" in that color. Please see pics / video above showing demon eyes in use. Please note, demon eyes are only an option if you do a projector retrofit.`

HID Upgrades:

In this section you can upgrade the light output from the stock halogens. We have a few options, a drop in kit (which consists of a set of bulbs, ballasts and wiring (of your choice) for the stock projectors), or projector retrofitting, which gives the best output - without blinding oncoming drivers.

Drop in kit, much better than stock halogens! Cutoff is a little fuzzy, but still focused light. This will give you approx 2-3x more light than the standard halogen bulbs.

With the projector retrofits, the output will be more focused, much wider beam of light. Below is an output shot of the Mini H1 projectors in the Ram quad lights.  Our D2S upgrade will give more intensity and a wider beam of light.  The MLED option keeps all wiring internal to the headlight, and will give exceptional output as well (in between the H1 and D2S projectors)

HID Harness Type:

How does the wiring look? See below (keep in mind, all show with the dust caps removed for picture purposes, the dust caps will be installed when the lights are sent out).

Canbus adapter:

 For the 2015 or newer Rams, the only option is the 15+ Mopar Spec relay harness. This harness includes the "right stuff" for these Rams, as the 15+ is the most picky!

Please note, it doesn't matter if you are getting a drop in kit or a retrofit, the same harness is used for either.

Whew, lots to take in! Each set is built to YOUR specifications and needs! Please, again - if you have ANY questions whatsoever for your build, don't hesitate to reach out for assistance! Our contact info is found at the top of the page under the "Contact us" section.

The one stop shop for custom Ram Quad lights!

This light building tool features each of our options for the 2009+ Ram projector lights. Continue reading to see details on each option, and as always - if there are any questions, don't hesitate to contact us. Please note, this tool is exclusively for the 2009+ quad style headlights.

The base cost of the lights includes the labor for us to open your headlights, remove the original sealant, reseal with retro rubber, and ship the lights back to you in continental US (shipping is available to anywhere in the world, if your country isn't listed during checkout, please contact us for a shipping quote). From here, each option is listed, so you can fine tune the lights to your needs.

Headlights:

In this section you can select to send in your headlights, or we can start with a set of OEM lights. If you are sending in your lights, please note that we are in St Louis, MO - shipping of your lights to our shop is on the customer, as is proper packing and insuring the lights. We stock lights as well, for those that are not sending in headlights for us to use. Examples of the lights used for the builds:

OEM Headlights - these are sourced locally from the dealership. Only difference is the finish, chrome or black. These are the exact lights that come on these trucks from the factory, great quality!

Paint:

Here, we can paint the lights to fit the style you are after. At RetroShop, we have a full time painter on staff, Dave (our painter) has over 20 years experience in the automotive paint industry and has painted over 1,000 sets of lights for us. We only use automotive grade paint / clear, just like what is used on the vehicle from the factory. We do NOT use spray cans, rattle bombs, etc. We do not use "VHT" or any other inferior products on our builds. Each part is media blasted for proper paint adhesion, primered, base coat / cleared, and buffed.

We have many options on paint, and can get them exactly how you'd like yours.

OEM paint matching - for your single color needs, we paint the inner bezel to match your truck. If you want the side amber painted or tinted, etc - we can do that as well, just make a note of this in the notes section. Few examples:

Dual Color paint:

On these builds, we combine any 2 colors that you are after, for a fully custom set of lights! As there are many many different ways to do these, please make sure you put in the notes what parts you want painted in each color. If you have a specific build you are wanting to duplicate, please email us pics! A few examples:

Clear corner:

We have the option to remove the amber reflector and install a clear replacement. Example:

Halos:

We have 6 options for customizing the Quad lights with halos.  Please note, round halos are only available with the projector options (as they mount to the projector shrouds).  

RGB color changing, these halos will come with a bluetooth remote control to set the colors . These halos will require a 12v power source, though most will splice to the parking lights on the truck (just remember, most colors may not be legal for on road use).

 

Video showing these in action:

Diode Dynamics Switchback halo options are our most popular setup!  This set shows both the quad and round halos.  These are white for parking lights and flash amber for turn signals.  You can select just the outer halo (Quad), the inner (round, if doing a retrofit) or both - depending on your needs.  

2 videos, showing switchback halos:

Demon eyes:

Demon eyes will give you that evil look for the shows! This product is only used when the headlights are off, and will make the projector "glow" in that color. Please see pics / video above showing demon eyes in use. Please note, demon eyes are only an option if you do a projector retrofit.`

HID Upgrades:

In this section you can upgrade the light output from the stock halogens. We have a few options, a drop in kit (which consists of a set of bulbs, ballasts and wiring (of your choice) for the stock projectors), or projector retrofitting, which gives the best output - without blinding oncoming drivers.

Drop in kit, much better than stock halogens! Cutoff is a little fuzzy, but still focused light. This will give you approx 2-3x more light than the standard halogen bulbs.

With the projector retrofits, the output will be more focused, much wider beam of light. Below is an output shot of the Mini H1 projectors in the Ram quad lights.  Our D2S upgrade will give more intensity and a wider beam of light.  The MLED option keeps all wiring internal to the headlight, and will give exceptional output as well (in between the H1 and D2S projectors)

HID Harness Type:

How does the wiring look? See below (keep in mind, all show with the dust caps removed for picture purposes, the dust caps will be installed when the lights are sent out).

Canbus adapter:

 For the 2015 or newer Rams, the only option is the 15+ Mopar Spec relay harness. This harness includes the "right stuff" for these Rams, as the 15+ is the most picky!

Please note, it doesn't matter if you are getting a drop in kit or a retrofit, the same harness is used for either.

Whew, lots to take in! Each set is built to YOUR specifications and needs! Please, again - if you have ANY questions whatsoever for your build, don't hesitate to reach out for assistance! Our contact info is found at the top of the page under the "Contact us" section.

Shipping Overview

What is your shipping cutoff time? 

Cutoff time for in stock items is 2PM CST for items shipping with FedEx.  USPS cutoff time is 10AM CST.   If you need a product by a specific date, please call us to find out if its possible to meet your deadline before ordering. Please be aware that there may be discrepancies with shipping calculators or “in stock” status of a product. 

 

Is shipping free? 

Orders over $99 qualify for free shipping within the lower 48 United States. We will select the most economical shipping option for our free shipping option.  If you'd like expedited service, please select that option during checkout.  Unfortunately, shipping to AK/HI or International we cannot offer free shipping, due to the extra costs incurred.  

 

How long will it take to get my stuff? 

Most in stock orders will ship the same day, if ordered before our cutoff times.  Custom items will ship when they are completed, please inquire for timelines on custom items (as this will vary).  We are located centrally in the US (St Louis MO) - so most items arrive within 2-4 days to the lower 48 US.  You will receive a tracking number when your item ships, allowing you to keep track of it at all times.  

 

I am an international customer, are fees / duties included in the shipping costs?

No, these fees will need to be paid by our international customers.  

 

How can I get a quote for shipping?

Please add the item in your cart and proceed through the checkout process. The system will display all the options we offer, along with a price. 

 

Refund / Exchanges

We have a 30-day return policy on non custom items, which means you have 30 days after receiving your item to request a return. 

To be eligible for a return, your item must be in the same condition that you received it, uninstalled and in its original packaging. You’ll also need the receipt or proof of purchase. 

To start a return, you can contact us at sales@retroshop.us. If your return is accepted, we’ll send you instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted. 

You can always contact us for any return question at sales@retroshop.us.

Damages and issues 
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items 
Certain types of items cannot be returned, like custom products (such as special orders or personalized items).  Please get in touch if you have questions or concerns about your specific item. 

Unfortunately, we cannot accept returns on sale items or gift cards.

Exchanges 
Please contact us for any exchanges at sales@retroshop.us.

Refunds 
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.